VACUUM ASSEMBLY
Exercise caution when handling the motor head.
Dropping the motor head may cause permanent damage to internal components.
FILTER INSTALLATION,
R
EMOVAL AND MAINTENANCE
3 & 4
Caster
Vacuums
These vacuums
require some
assembly.
1) Carefully remove and set aside the
motor head and filter assembly.
2) Turn the canister upside down.
Insert casters into caster mount
assemblies and press down to lock in
position.
Glidemobile
w/Handle
Vacuums
The vacuum's
handle is in the
storage position when shipped and
must be moved to the operating posi-
tion.
1) Firmly grasp the speed pins on each
side of the handle and pull up and out.
2) Pull handle slowly away from tank
and align front handle holes in handle
bracket.
3) Insert speed
pins through holes
on both sides,
locking handle in position.
Hose & Swivel Connector
The hose and swivel connectorare pre-
assembled at the factory and attaches
to the canister intake.
1) Line up the swivel connector slots
with the retaining rivets on the intake.
2) Insert swivel connector and twist
clockwise until rivets rest against slot
ends.
CAUTION
PAGE 4
The Sootmaster vacuums are designed for dry pickup. The 660M and 661M can be
converted to a wet vacuum providing you use the optional wet pickup adaptor (305987).
To Install
Paper Filter Bag & Cloth Filter:
1) Remove the motor head and set
aside. Empty filters, hose and other
attachments that may be packed in the
tank.
2) Expand filter bag pleats, then grasp
scored ends of cardboard and pull for-
ward completely onto inlet tube as
close to tank wall as possible.
3) Position the cloth filter assembly on
top of the tank, replace motor head on
tank and close the clamps.
To Remove Loaded
Filter Bag:
1) Remove motor head and cloth filter
assembly and set aside. Lay cleaner on
its side with inlet tube on top.
2) Pull bag out of tank, using care not
to puncture bag with inlet tube.
3) Reseal cardboard flap that covered
filter bag opening.
Install a fresh NEW paper filter bag.
Cloth Filter Maintenance:
In order to maintain maximum efficien-
cy of the vacuum cleaner it is important
to clean the cloth filter each time the
tank is emptied. To clean the cloth filter,
shake off loose particles and brush
exposed surface with a soft bristle
brush
NOTE: DO NOT WASH, shrinkage to
the cloth and damage to the gasket can
occur.
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals